Monofilter

Bring transparent solidity to your bass; sharpen, define and align for the tightest mix. Monofilter anchors your bass with ease, while retaining the perceived spatial characteristics of the original sound.
Up to 24 hours, all week, even on holidays
Log in to see Member Price
The price is Too Low to be shown to the public

Details

When solid or natural sounding bass is a requirement in your recording projects, Monofilter provides the foundation for real power and definition.
Bring transparent solidity to your bass; sharpen, define and align for the tightest mix.
Monofilter defines the centre of your bass, so easily lost through stereo effects processing, synth sound generation, unwanted phase inconsistencies and live recording microphone bleed.
Market-leading features give accurate control over stereo spread, transition and phase alignment, with precise visual feedback in a tactile interface that lets you grab the applied stereo envelope and manipulate it directly – without using abstract parameters and knobs.

With presets for every situation and intuitive controls for fine tuning to perfection, Monofilter anchors your bass with ease, while retaining the perceived spatial characteristics of the original sound.

  • Independent mono & stereo trim
  • Stereo spectrum analysis
  • Zero Latency option
  • Linear Phase option
  • HQ mode
  • Phase correlation control

 

Detailed control

Monofilter offers powerful fine-tuning of your low end sounds and their interaction with higher frequencies.
The plug-in's highly tweakable parameters include a high pass filter, plus independent width control of user-defined high and low frequencies.
These width controls range from completely mono at their minimum point, to completely unchanged at their maximum.
The changes are clearly displayed in an easily intuitive stereo width envelope.

 

Automatic phase alignment

Stereo effects which use phase shifting can cause cancellations and superpositions of certain frequencies when played back in mono.
Monofilter includes a Phase control which can correct phase imbalance below its threshold frequency by adjusting the phase of the L and R components being summed.
This function has an auto mode which can be especially useful for input signals with a dynamic phase shift.

 

For mixing and mastering

With multiple algorithm settings, you can easily choose the most appropriate for the task at hand, including zero-latency for recording and linear-phase for general mixing.
Switch in HQ mode for ultimate definition during mastering.
Monofilter becomes especially useful when mastering for vinyl. 
Vinyl has difficulty reproducing stereo information in the low frequencies, and wide stereo frequencies in the bass can cause the needle to jump upon playback, so the track has to be cut at a lower level to compensate.

 

For live and recording

Monofilter's Zero Latency algorithm has been designed with low CPU usage in mind, making it ideal for live and recording applications where low latency is essential. 
The 'link' control can be used to switch all Monofilter instances to the same algorithm simultaneously.
In a live context, you can use Monofilter to maintain even power distribution, and to reduce the width of hard-panned effects.
This can be important in larger venues where many audience members' listening experience may be dominated by a single speaker stack, leaving them unable to experience the full stereo image.

 

Playback systems

Different playback systems and mediums have different requirements and low frequency ranges.
If the intended playback medium is known, then Monofilter can be adjusted to make full use of the available headroom and optimised to take into account the low frequency handling available.
Some likely ranges are as follows: 

  • Laptop - Minimum frequency 200Hz
  • TV - Minimum frequency 90Hz
  • Computer game 2.1 system - Minimum frequency 50Hz
  • Hi-fi - Minimum frequency 35-50Hz; low frequency crossover 80-150Hz
  • Home theatre - Minimum frequency 35Hz; low frequency crossover 80-160Hz
  • Club PA - Minimum frequency 20Hz; low frequency crossover 90-250Hz
  • Vinyl - Minimum frequency n/a; low frequency crossover 70-150Hz

 

Typical applications

  • Bringing definition to weak bass
  • Re-centering low frequencies
  • Correcting phase issues
  • Restoring old masters
  • Mastering for vinyl
  • Optimising for louder playback
  • Ensuring mono-compatibility
  • Fixing samples

 

Additional Information

Product's Website https://nugenaudio.com/monofilter
Supply Time Up to 24 hours, all week, even on holidays
Requires iLok No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

1. Activate it ...

2. Download it ...

3. Use it !

 

FREE SHIPPING

Activation sent online
 

FAST RESPONSE

To any "Contact us" inquiry
 

HUGE DISCOUNTS

For our registered users
 

SPECIALS & PROMOTIONS

Almost always everywhere